Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
e. When set Timer-1, the start time and end time setting are required, divided into
morning and afternoon. Press
Press
to set the start morning session running time by
to set end time (shown as figure 8). Save and back to
(figure 7). Timer-1 is running. Note: end time must be larger than start time, or system
defaults no setting time.
Figure 9
f.
When set Timer-2, Display cycle time above the display screen"2h/1h" as figure 10.
And for 3 kinds of periodic time choice,
a.
2h/1h: recycling of operation for two hours and breaking one hour.
b.
3h/1h: recycling of operation for three hours and breaking one hour.
c.
4h/1h: recycling of operation for four hours and breaking one hour.
4. Operation
a. Chlorine production:
press
showed on the LCD display and start. Delay 5 seconds, "Chlori-ne icon will be
showed in LCD display and start to produce chlorine. If the system is to Timer-2, the
chlorine starts and stops upon based prog-rammed time, shown as figure 11.
button into morning time setting (shown as figure 9). Press
button, the "Power indicator will be lit and the pool pump will be
Figure 11
button to page 1/2. Move the cursor to Timer-1.
buttons (1-12 hours), same
LCD, is shown, as
Figure 8
press button, Select switch.
Figure 10
Figure 7
10
Advertenties
Hoofdstukken
Inhoudsopgave
