Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
THE OPERATING ENVIROMENT AND
MAINTANCE OF SALT ELEKROLYSE
The operating water environment of the salt chlorine generator
1- Water chemistry condition
May the pool bring you a lot of fun, may secure your swimming, may prevent from corrosion
and scale on your pool equipment, please keep regular test and check your pool's water
quality. The following chart is the national and international standard of water chemistry
environment for swimming pool, and the best water quality condition for Laswim salt
chlorine generator working.
chemicals
free residual chlorine
salt
Ph value
total basicity
stabilizer
calcium hardness
Total dissolved solid amount
(including sault)
Metal
(ron coppe, anganese)
nitrates
phosphate
saturation index
2- Saturation index
The saturation index (SI) is related to the calcium and alkali amount in the pool water, it is an
indicator if the water is balanced in a swimming pool. The SI is between 0~0.2 or -0.2~0, the
water quality in the pool is perfectly balanced; if the IS is higher than 0.2 or lower than -0.2,
the water may cause damage or corrosion to the pool and pool equipment's.
Saturation index calculation formula:
Saturation index = PH value + Calcium Hardness coefficient + total basicity
ratio coefficient + temperature coefficient + total dissolved solid coefficient.
recommended value
1-3.0ppm
2700-4500ppm
7.2-7.8 (within this range, the chlorine requirement is
minimized but the disinfectant effect is maximized)
75-250ppm
60-80ppm
75-500ppm
3500-5700ppm, Maximum does not exceed 6000ppm
-0.2-0.2 (0 is the most optimal)
0
0
0
14
Advertenties
Hoofdstukken
Inhoudsopgave
