Download Inhoudsopgave Inhoud Print deze pagina

BENIFERRO SQ020 Handleiding pagina 17

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

B. When below 2400ppm, the salt chlorine generator would stop working, and indicate
E5.
C. When higher 4500 ppm, may corrode and damage pool equipment, the salt chlorine
generator will stop working and indicate E4.
NOTE
With different measuring practices, the salt concentration will differ. The tolerance scope is
+/-500ppm (0.05%)
4- Regulated swimming pool salt concentration.
The correct way of increasing the salt concentration.
A. Activate the swimming pool circulation pump and start the pool water circulation.
B. Turn off the power source of LASWIM salt chlorine generator.
C. Test and find the current salt concentration of the pool.
D. Calculate the amount of salt needed to be added from the chart.
E. Pour the salt along the side of the pool slowly, allowing it to dissolve evenly and
quickly into the water. Do not allow the salt to pile up on the bottom of the pool, stir
the water when necessary.
F. Run the circulation pump for 24 hours for the salt to be evenly distributed through the
whole pool.
G. After 24 hours, measure the salt concentration of the pool again to see if it has
reached the desired level.
H. When the salt concentration has reached the desired value, activate the LASWIM Salt
cholorine generator to produce chlorine according to your setting.
Decreasing salt concentration.
The only way to decrease the salt concentration is to discharge some of the water, then add
fresh water to the pool and measure the concentration of the pool referring to 2.41.
The weight of salt needed to maintain 3200ppm (0.32%) for each ton of water. Unit in
kilograms.
The salt concentration ppm
before
The weight of salt needed
to add per
ton of water
The salt concentration ppm
before
The weight of salt needed
to add per
ton of water
The salt concentration ppm
before
The weight of salt needed
to add per
ton of water
The salt concentration ppm
before
The weight of salt needed
to add per
ton of water
0
100
200
300
3.210
3.111
3.012
2.912
1000
1100
1200
1300
2.216
2.116
2.017
1.917
2000
2100
2200
2300
1.219
1.119
1.020
0.920
3000
3100
3200
3400
0.220
0.121
Best
OK
400
500
600
700
2.813
2.713
2.614
2.514
1400
1500
1600
1700
1.817
1.718
1.618
1.518
2400
2500
2600
2700
0.820
0.720
0.620
0.520
3600+
Excess
800
900
2.415
2.315
1800
1900
1.419
1.319
2800
2900
0.420
0.320
17

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Sq030Sq040Sq050Sq060

Inhoudsopgave