Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note:
A. This diagram is used as a reference to calculate the amount of salt to add to water.
B. Calculate the amount of salt needed to add to the pool according to 2.1. for example, for
153 square cube (153 ton) of water, the original salt concentration is 400PPM, to reach
3200 PPM check the diagram. The diagram states that for each ton of water at 400PPM
2.813kg salt needs to be added, therefore for 153 ton of
water the amount of salt needed
is 2.813 * 153 = 430kg.
C. The readings of different measuring instruments are different, set 3200ppm as the optimal
value. The actual salt added to the water should be precise to each kilogram. The salt
concentration of the water needs to be between 2700-4500 PPM for the optimal working
environment of the salt chlorine generator.
The stabilizer needed for each ton of water to be kept at 75ppm (0.0075%). unit: kg
The concentration of stabilizer
before ppm
The weight of stabilizer needed to
be added to each ton of water
The concentration of stabilizer
before ppm
The weight of stabilizer needed to
be added to each ton of water
Note:
A. This chart is used for referencing and calculating the amount of stabilizer to add to the pool. The
optimal value of the stabilizer should be around 60-80 ppm, and 75ppm should be the standard.
B. According to 2.1 to calculate the amount of stabilizer needed to add in pool. For example, for a
pool of 153 m, the initial stabilizer concentration is 35ppm, to
reach 75 ppm, the weight of the
stabilizer needed to add = 0.040*153 = 6.12kg.
Maintenance of salt chlorine generator.
1- Maintenance of electrolytic cell
To ensure the LASWIM salt chlorine generator work in best working performance, cel
cleans by reverse the polarity every four hours, check the electrolytic cell every 3 months
or after cleaning the filter.
A. Before removing the electrolytic cell, first power off the salt chlorine generator 5-10
minutes, then close inlet/outlet valve.
B. After removing the electrolytic tank, check the cell wall for flaky sediment, debris,
light colour crust or other dirty.
0
5
10
15
0.075
0.070
0.065
0.060
50
55
60
65
0.025
0.020
0.015
0.010
20
25
30
35
0.055
0.050
0.045
0.040
70
75
80
0.005
Best
OK
40
45
0.035
0.030
80+
Excess
18
Advertenties
Hoofdstukken
Inhoudsopgave
