Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Caution!
Danger of injury: The following parts are hot or may become hot:
• area around the water lever valves
• steam and hot water tube
• filter holder
• brew group
• body (upper part and side frames)
3.2 Technical data
Voltages:
Frequency:
Power:
Water tank:
Measurements:
Measurements
with filter holder:
Weight:
4
MACHINE INSTALLATION
The installation is to be carried out exclusively by qualified specialists and according to the following
instructions and in compliance with valid laws.
The following chapters deal with the preparation of the machine, its electrical connection, water supply connection
and drain connection.
4.1 Preparation for installation
• Place the machine on an even and stable surface. You can regulate the height by adjusting the feet
of the machine.
• Never place the machine on hot surfaces.
4.2 Electrical connection
• Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
Instruction manual MECHANIKA & TECHNIKA PROFI DUE
EU: 230 V
UK: 230 V
New Zealand: 230 V
Australia: 230 V
US: 115 V
EU: 50 Hz
UK: 50 Hz
New Zealand: 50 Hz
Australia: 50 Hz
US: 60 Hz
2,500 W
approx. 3.0 l
Mechanika Profi Due: w x d x h / 545 mm x 450 mm x 425 mm
Technika Profi Due: w x d x h / 580 mm x 472 mm x 415 mm
Mechanika Profi Due: w x d x h / 545 mm x 558 mm x 425 mm
Technika Profi Due: w x d x h / 580 mm x 580 mm x 415 mm
42 kg
21
ENGLISH
Advertenties
Inhoudsopgave
