Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INITIAL PROGRAMMING OF CONSOLE COMPUTER
8. Enter SPEED CAL of 688 in key labeled:
9. Enter METER CAL calibration number in key labeled:
10. Enter VALVE CAL calibration number (2123) in key labeled:
11. Enter the target RATE 1 (GPA) (lit/ha) (GPK) you want to spray in the key labeled:
12. Enter the target RATE 2 (GPA) (lit/ha) (GPK) you want to spray in the key labeled:
use a second rate, enter same rate as RATE 1 CAL). RATE 2 should not be more than 20% different from
RATE 1 or else spray pattern may suffer.
YOU HAVE NOW COMPLETED PROGRAMMING THE CONSOLE.
The flashing "CAL" will now extinguish. If not, repeat procedure starting at step 5. You may also wish to enter
data in the keys labeled:
13. Enter the estimated total Volume-in-Tank when you start spraying in key labeled:
tank is refilled, this number must be reentered.
14. Enter the TIME of day in the key labeled:
add 12 hours. Thus, 8:30 am is entered as 8:30, but 1:30 pm is entered as 13:30 in the keyboard.
OTHER DISPLAY FEATURES
1. To display TOTAL AREA covered, momentarily depress key labeled:
time, enter a "0" in this key.
2. To display TOTAL VOLUME sprayed, momentarily depress key labeled:
any time, enter a "0" in this key.
3. To display FIELD AREA covered, momentarily depress key labeled:
time, enter a "0" in this key.
4. To display FIELD VOLUME sprayed, momentarily depress key labeled:
any time enter a "0" in this key.
5. To display DISTANCE (feet (meters) traveled) momentarily depress key labeled:
total, at any time, enter a "0" in this key.
and
although it is not required for the operation of the system.
. This is a 24 hour clock. Therefore, all time after 12:59 pm,
(CONTINUED)
(If you do not
Each time the
To "zero out" this total, at any
To "zero out" this total, at
To "zero out" this total, at any
To "zero out" this total, at
To "zero out" this
17
Advertenties
Hoofdstukken
Inhoudsopgave
