Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USE
Boost power management
•
Due to the restricted power of the induction hob, the boost function can only be set on one
cooking zone simultaneously (for both left or right cooking zones). Both cooking zones can
be set to level 9. If one cooking zone is on the Boost level, the other cooking zone can be
set maximal to level 7/8.
▷
The cooking zone, which is set to a lower power, will be flashing in the display.
Pan detection
If the hob does not detect a (ferrous) pan after the cooking level has been set, the pan detection
symbol flash in the display.
Cooking-timer/alarm
•
A cooking-timer can be set for each cooking zone.
•
The hob also has an alarm. Both the cooking-timer as well as the alarm can be set for a
maximum of 99 minutes.
•
The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone.
If the alarm has been set, it will continue counting down after the hob has been switched
off.
•
The alarm can only be switched off when the hob is switched on.
Select the desired function:
1. Cooking-timer — the timer is linked to a cooking zone. After the set time has elapsed, the
cooking zone will switch off automatically.
2. Alarm — the alarm only beeps after the set time has elapsed.
Indications in the display
Cooking
zone
display
<->
EN 10
Cooking zone status
Power level cooking zone; 1 = low level / 9 = high level
Cooking zone boost level active.
No (suitable) pan on cooking zone (pan detection symbol).
Fault code; See 'Troubleshooting table'.
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator 'H' will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
