Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Changing the setting
Press the
Clock button. Use the + or - button to change the
0
cooking time.
Cancelling the setting
Press the
Clock button. Press the - button until zero is
0
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the
Clock button twice and make your settings as
0
described in point 4.
If the oven is to switch on and off
automatically
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example in the picture: Setting for
190 °C. It is 10:45 . The meal takes 45 minutes to cook and
should be ready at 12:45 .
The function selector is used to set the type of heating.
1.
The temperature selector is used to set the temperature or
2.
grill setting.
Press the
Clock button.
0
3.
Use the
or
button to set the cooking time.
@
A
4.
Press the
Clock button repeatedly until the
0
5.
flashes.
You can see in the display when the meal will be ready.
Setting the clock
When the appliance is connected for the first time or after a
power cut, the
0
symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.
Setting procedure
Press the
0
Clock button.
1.
12.00 appears in the display and the
Use the + or - button to change the clock.
2.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
Press the
Clock button twice and change the time using the
0
+ or - button.
14
button
0
%
Top/bottom heating at
End symbol
y
0
symbol flashes.
symbol goes
0
Use the
button to set a later end time.
@
6.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Rapid heating
With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
Set the function selector to
1.
Turn the temperature selector to set the desired temperature.
2.
The
p
symbol lights up in the display. The oven begins to heat
up.
The rapid heating process is complete.
The
p
symbol goes out in the display. Place your dish in the
oven and select the desired type of heating.
button
0
.
I
Advertenties
Hoofdstukken
Inhoudsopgave
