Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Vervangen vet lters
Replace grease lters for optimum operation of the ex-
tractor hood, the following is recommended Novy to re-
place the grease
lter after 5 years. Grease
number for the Fusion Pro / Advanced is 8740.050. In
the model of 60 cm, 90 cm and 120 cm are respectively
2, 3 and 4 grease lters.
UK : contact the Novy service department (Tel.:
+44 (0) 207 866 2493) or your local installer
to order the grease lter.
4.2
Recirculation (option)
If you have chosen for recirculation, please follow the in-
structions below.
The red LED will light up after 400 working hours (time to
regenerate the Monoblock recirculation
culation lter is to be found behind the grease lter.
Remove the Monoblock recirculation lter
•
Open the bottom plate with both hands and remove
the aluminium grease lter from the hood.
•
The Monoblock recirculation lter is found in its ope-
ning in the cooker hood. Remove it from the cooker
hood.
Regenerate the Monoblock recirculation lter
•
The Monoblock can be regenerated up to 12 times.
This is done in the oven.
•
Place the lter in the oven for 1 hour at 120°C. Provi-
de su cient fresh air in the room where the oven has
been placed, as smells can be released. Smells can
be released when baking certain kinds of sh. In this
case it is best to im-mediately regenerate the lter in
the oven.
Reset the Monoblock recirculation
(motor) must be running)
Simultaneously press
2
indicator lamp ashes 3 times for con rmation. If the pro-
gramming is not carried out, the programming is auto-
matically set after the chimney hood has been switched
on 10 timesin- en uitschakelen van de motor automatisch
resetten.
lter type
lter). The recir-
(The cooker hood
lter
and
for 3 sec. until the red
3
Place the Monoblock recirculation lter
•
Open the bottom plate with both hands and remove
the aluminium grease lter from the hood.
•
Place the Monoblock recirculation lter is its opening
in the cooker hood.
•
Put back the aluminium grease
bottom plate.
Vervangen monoblock lter
Replace monoblock lter for optimum operation of the
extractor hood, the following is recommended Novy to
replace the monoblock
lter type number for the Fusion Pro / Advanced
is 8740,400.
UK : contact the Novy service department
(Tel.: +44 (0) 207 866 2493) or your local in-
staller to order the monobloc lter.
4.3
Maintenance of the hood
Please allow the lights to cool down su ciently before
cleaning the hood. Use a soft, wet cloth and a mild de-
tergent to clean the hood. Never use aggressive, abrasi-
ve detergents or sponges. Bleach will damage stainless
steel. The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
4.4
Technical problem
In case of technical problems please contact Novy
Service Department:
Belgium Tel.: 056/36.51.02
France Tel.: 03.20.94.06.62
Germany Tel.: 0511.54.20.771
For all other countries: your local installor or Novy Belgi-
um: +32 (0)56/36.51.02
Please supply us with the model number of your hood.
The model number can be found on the engraved
plaque behind the lter.
You can make a note of the number here:
.................................
lter and close the
lter after 6 years. Monoblock
EN 31
Advertenties
Hoofdstukken
Inhoudsopgave
