2.3
Precautions not to damage the appliance
•
The mounting instructions describe the correct way
of mounting. Carefully read these instructions.
•
Check the distance between the cooking surface
and the hood. The minimum and maximum heights
are indicated in the mounting instructions.
•
•
Never use the hood without the fat lters in order to
prevent dirt and fat from further entering the hood,
which will eventually a ect the performance and
functioning of the hood.
•
Always stay around when you are frying, roas-
ting, grilling of deep-frying. Overheated oil and fat
may-catch re and damage the hood.
2.4
Air supply
When using a hood su cient air
However large your kitchen may be, there is only so
much air available in that space. Opening a door or
window or the installation of a ventilation grid clo-
se to the hood insures a good quality of air
EN 28
The controls are on the rotating valve.
Open the glass cover by turning it towards you.
ow is necessary.
ow.
1
2
3
4
5
6
3.1
Switch on – switch o
To switch the motor on push button
ways resume the level it was previously switched o in.
Switch o with 10 minute delay
Press button
other LED's remain lit up according to the level in use.
After 10 minutes motor and illumination switch o auto-
matically.
3. OPERATION
3. OPERATION
switch on / o
decrease speed level
increase speed level
illumination
indication speed levels stand
Extraction
once. The
1
. The hood will al-
1
rst green LED blinks, the