Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Programming the ventilation/tilt position
Prerequisite: The roller shutter/blind is in the lower limit position.
1.
Press and hold the ventilation/tilt position programming button
2.
Also press the UP button until you reach the desired ventilation/tilt posi-
tion. Adjustments can be made using the UP button or DOWN button.
3.
Release the ventilation/tilt position programming
tion/tilt position is now saved.
The indicator lamp flashes briefly three times.
Deleting ventilation/tilt position
Press the ventilation/tilt position programming button
seconds. The ventilation/tilt position is now deleted.
The indicator lamp flashes briefly three times.
Only clean the device with a suitable cloth. Do not use aggressive cleaning
agents that may damage the surface.
Rated voltage
Switching current
Degree of protection
Class of protection
(dependent on correct assembly)
Permissible ambient temperature
Type of mounting
Cleaning
Technical data
230 V AC / 50 Hz
5 A / 250 V AC at cos
IP 20
II
0 to +55 °C
Flush mounted Ø 58 mm, wall moun-
ted/surface mounted in appropriate
surface mounted housing
.
button. The ventila-
for more than 5
=1
23 - en
Advertenties
Hoofdstukken
Inhoudsopgave
