Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Functions in Manual mode
• UP, STOP, DOWN
• Intermediate position
• Ventilation/tilt position
Functions in Automatic mode
• UP, STOP, DOWN
• Intermediate position
• Ventilation/tilt position
• Time automation
Travelling to tilt position (blind)
When using the blind function, the blind moves in touch mode in order to en-
able precise positioning of the slats. If a travel button is pressed for more than
1 second, the blind moves in maintained operation.
After the programmed intermediate position is reached, the slats are automat-
ically tilted (provided the tilt position has been programmed).
Travelling to intermediate position
Only travel the shading solution to the intermediate position or programme it
from the upper limit position.
Press the DOWN button briefly twice in succession. The shading solution
moves to the saved intermediate position.
Travelling to ventilation position
Only travel the shading solution to the ventilation position or programme it
from the lower limit position.
Press the UP button briefly twice in succession. The shading solution moves
to the saved ventilation position.
Setting the coding switch:
Lower position -> roller shutter mode
Functions
Factory default settings
21 - en
Advertenties
Hoofdstukken
Inhoudsopgave
