Explanation Of Functions - Becker Centronic SunWindControl SWC441-II Montage- En Gebruiksaanwijzing

Voor zon-wind-besturing

Inhoudsopgave

Advertenties

Beschikbare talen

Explanation of functions

Manual/Automatic slide switch

In slide switch position " " only manual drive commands and alarm signals can

be performed (e.g.: RETRACT, STOP, EXTEND via button actuation and wind

alarm).

In slide switch position " " automatic drive commands are performed (e.g.

sun protection, ...).

The automatic sun protection functions are interrupted if a manual drive com-

mand is carried out when in automatic mode. These functions are automatic-

ally re-activated if upper/lower threshold limits are violated, following retrac-

tion, or if the slide switch is switched from " " to " " and back to " ".

Channel

The channel of a transmitter can be programmed into one or more receivers.

One receiver is operated through an individual command, several receivers

through a group command.

Channel indicator lamp

A radio signal is indicated by the channel indicator lamp lighting up. When the

battery starts to lose power, the channel indicator lamp flashes when transmit-

ting. The transmission strength and the radio range decrease as battery power

declines. If the channel indicator lamp no longer lights up when a button is

pressed, the battery must be replaced.

18 - en

Inhoudsopgave

Advertenties

Inhoudsopgave