Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Becker Handleidingen
  4. Radiozenders
  5. CentronicPLUS SWC541 PLUS
  6. Montage- en gebruiksaanwijzing

Thresholds; Operating Modes - Becker CentronicPLUS SWC541 PLUS Montage- En Gebruiksaanwijzing

1-kanaals voor zon-windbesturing bidirectioneel
Verberg thumbnails
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Intermediate position I + II
The intermediate positions I + II are freely selectable positions for the shading
solution between the two limit positions. Each travel button can be assigned
one intermediate position. Both limit positions must be set before an interme-
diate position is set.
Whether or not this function is available depends on the devices used and is
described in the relevant instructions for the receiver.

Thresholds

The function button can be used to retrieve and set thresholds for sensors.
Whether or not this option for setting values is available depends on the
devices used.
Installation key
All of the devices operating within an installation must have the same installa-
tion key in order to communicate with one another. This key is created on ini-
tial commissioning, and is then transmitted to the additional added devices.
The installation key is only known to the programmed devices, and cannot be
read off. The commissioning procedure is described in the relevant instruc-
tions for the receiver.

Operating modes

Normal mode
Receiver selection
Setting mode
Threshold mode
Press and hold the programming button for 3 seconds to access receiver se-
lection.
You can now press the programming button once to switch back and forth
between receiver selection and setting mode.
In setting mode, you can press and hold the function button for 3 seconds to
switch to threshold mode.
Press the programming button once to switch from threshold mode back to
setting mode.
To access normal mode, press and hold the programming button for 3
seconds.
Control of selected receiver/channel
Selection of the required receiver and chan-
nel assignment
Commissioning and administration of selec-
ted receivers
Threshold setting for selected receivers
29 - en

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Becker CentronicPLUS SWC541 PLUS

Gerelateerde Producten voor Becker CentronicPLUS SWC541 PLUS

Inhoudsopgave