Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
manual / automatic
You can display and select the "Manual" or "Automatic" setting by pressing the
STOP button. Only manual drive commands and emergency signals can be
performed with the "Manual" setting. In addition, automatic drive commands
are also performed in the "Automatic" setting. The automatic functions are not
interrupted if a manual drive command is carried out when in automatic mode.
3s
5s
Identification of the hand-held transmitter
A colour can be assigned to the LED ring of the hand-held transmitter by
pressing the function button to make the device easier to identify. The stored
colour can be displayed by briefly pressing the function button. If the function
button is pressed for longer than 3 seconds, the LED ring flashes briefly. The
required colour can now be set by pressing the
available: press the function button again for longer than 3 seconds to store
the colour currently selected.
Battery status
28 - en
Press the STOP button for 3 seconds to display
the current status.
Automatic
mode:
Manual mode: The LED ring lights up red.
Different
modes:
You can toggle between manual and automatic
mode by pressing the STOP button for 5 seconds.
Battery status low
LED ring flashes yellow 4 times following normal
feedback.
Battery status empty
LED ring flashes red 4 times following normal
feedback.
The LED ring lights up green.
The LED ring lights up yellow.
or
button. 9 colours are
Advertenties
Hoofdstukken
Inhoudsopgave
Gerelateerde Handleidingen voor Becker CentronicPLUS SWC541 PLUS
Gerelateerde Producten voor Becker CentronicPLUS SWC541 PLUS
- Becker CentronicPLUS SWC548 PLUS
- Becker CentronicPLUS SWC5416 PLUS
- Becker Centronic SunWindControl SWC545
- Becker Centronic SunWindControl SWC241-II
- Becker Centronic SunWindControl SWC442-II
- Becker Centronic SunWindControl SWC245-II
- Becker Centronic SunWindControl SWC441-II
- Becker Centronic SunWindControl SWC445-II