Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Burnt sugar and melted plastic must be removed immediately, when they are still hot, with a glass scraper. Then
clean the hob again as described under Item 2.
Grains of sand which may get onto the hob when you peel potatoes or clean lettuce may scratch the surface of
the hob when you move pots around. Make sure that no grains of sand are left on the hob.
Changes to the colour of the ceramic surface have no effect on the function and stability of the glass ceramic.
These colour changes are not changes in the material but food residues which were not removed and which have
burnt into the surface.
Shining areas are caused by wear from pan bottoms or unsuitable cleaning agents, especially when using
cookware with aluminium bases or by unsuitable cleaning agents. They are difficult to remove with standard
cleaning agents. You may need to repeat the cleaning process several times. In time, the decoration will wear off
and dark stains will appear as a result of using aggressive cleaning agents and faulty pan bases.
5.3
How to remove the filters from the appliance
To gain access to the grease (4) and activated carbon (5) filters, the air inlet glass (1) and the condensation filter
(2) with the water collector (3) have to be removed first.
The activated carbon filters are available only in C-version!
1
2
3
5.4
Air inlet glass and grease filters
The grease filters absorb the greasy particles from cooking vapours.
Make sure that the cooktop and cooktop extractor are switched off (see the Operation chapter).
Wait until the fan indicator shows 0.
Remove the air inlet glass and the grease filters
Use a cleaner and degreaser in one.
Rinse the air inlet glass and grease filters with hot water.
Use a soft brush to clean the air inlet glass and grease filters.
After cleaning, rinse the air inlet glass and grease filters well.
Dry the air inlet glass and grease filters with a tea towel.
Press below the symbol
Do not put the air inlet glass in the dishwasher.
CLEANING AND CARE
and hold for 3 seconds to reset the filter timer.
18
4
5
EN
Advertenties
Hoofdstukken
Inhoudsopgave
