Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
4.19 Warming
4.20 Safety switch-off
4.21 Protection from
overheating
4.22 Timer
OPERATION
The warming function is used to keep cooked food warm. Hence this function can
also be used as melting or simmer function.
Activation
Press
of a cooking zone activates the "warming"
By repeatedly pressing
"Keeping warm" (70°C) and finally to "Cooking" (94°C)
If
is pressed a fourth time "warming" function ends.
Maximum continuous operation of a particular hotplate is limited, and the duration is
displayed in the above chart. When the hotplate is switched off by the safety
mechanism, the indicator displays symbols
remaining heat left.
Power setting
Warming (3 levels)
1
2
3
4
5
6
7
8
9
P
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not
change the above setting, the safety mechanism will switch the hotplate off after 210
minutes.
Induction hotplate is also fitted with safety device against overheating which protects
electronic parts from damages. This device operates on several levels. When
temperature of the hotplate excessively rises, it switches on two-stage fan. If this is
not enough, extra powerful heating is deactivated, and finally the safety device either
reduces the heating power of certain hotplates or turns them off completely. When
the hotplate cools off, the full power of hotplate is again available.
Using a timer facilitates cooking by setting the time of hotplate operation. For each
zone it's possible to set an independent timer.
Activation
The cooktop must be turned on and the zone where you want to set the timer must
be working.
Simultaneously press
the first active cooking zone from the left, lights on
Simultaneously press
where you want to set the timer .
Within 10 seconds since pressing
or
.
The value of the timer can be displayed:
in minutes and seconds up to 9min59sec;
-
in hours and minutes up to 9h59min, in this case the word "min" is shown
-
under the timer's display.
Operation time can be set for each hotplate separately.
13
the warming level is increased from "Melting" (42°C) to
, or
Minutes lapse prior safety switch off
120
516
402
318
258
210
138
138
108
90
10
and
, the timer's display shows
and
as many times as necessary, to select the zone
lights on only for active cooking zones.
and
;
in case there is any
and
set the timer value by pressing
, of
Advertenties
Hoofdstukken
Inhoudsopgave
