4.23 Alarm
OPERATION
Changing pre-set cooking time
Cooking time can be changed anytime during the operation.
Simultaneously press
Simultaneously press
where you want to set the timer.
Within 10 seconds press
Checking remaining cooking time
Last set timer is always displayed (
Simultaneously press
Simultaneously press
which you want to see the remaining time. The zone is identified by the lighting on
The timer's display will display the remaining time of the selected cooking zone.
Deactivation
When pre-set time elapses, a beep signals the end, and the hotplate is switched off.
Switch off the alarm by pressing the sensor
after 2 minutes.
If you want to deactivate the timer prior the end of pre-set time:
Simultaneously press
Simultaneously press
where you want to set the timer. The zone is identified by the lighting on of ;
Press
to the value
is turned off and the timer is deactived .
Timer can be used as alarm also if it is already employed in timer control of one of
the hotplates.
Timer setting
With the hob off:
Press
to activate the cooking hob;
Simultaneously press
. If some cooking zone is active,
left, lights on;
Simultaneously press
The respective
is located between
The timer value is set by pressing
It's possible setting the time in minutes and seconds or, in hours and minutes also
for the alarm.
Switching the alarm off
When the pre-set time expires a beep is heard which you can either turn off by
pressing
or
, or leave it to turn off automatically after 2 minutes.
If you want to switch the timer off prior expiry of pre-set time:
Simultaneously press
Simultaneously press
light on;
Press
until the value
14
and
.
and
as many times as necessary, to select the zone
light on only for the active cooking zones.
and
to modify the time.
has a lighting stronger than the others);
and
;
and
as many times as necessary, to select the zone of
or
and
;
and
as many times as necessary, to select the zone
.
and
to activate the alarm. The timer's display shows
of the first active cooking zone from the
and
as many times as necessary to select the alarm.
or
;
or
;
and
;
and
as many times as necessary to select the alarm,
. The alarm is deactivated.
or it switches off automatically
EN