Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Disconnect the product from the
power supply before cleaning
and when not in use.
Refer to the "Cleaning and
care" section for instructions on
how to clean the product.
˜ Before first use
Remove all the packaging materials.
*
Clean the product (see "Cleaning and care").
*
Boil the maximum water volume of 1.7 litres
*
(see "Operation"). After boiling, discard the
water to remove any production and transport
residues.
˜ Operation
m
Danger of burns! The lid
closed when pouring hot water. Otherwise,
hot water or steam could escape over the rim
causing burns.
˜ Placing the product
Keep the power cord
*
Wrap the excess power cord onto the cord
storage
(bottom of the base
8 ]
[
Guide the power cord
*
cord guide
.
7 ]
[
Place the base
[
9 ]
*
Maintain a safe distance to walls and
cupboards to avoid damages caused by rising
steam.
˜ Boiling water
Press the lid opening button
*
lid
. Fill the water kettle
2 ]
[
Place the water kettle
*
Push the I/O switch
*
The LED ring
(on the bottom of the water
10 ]
[
kettle
) lights up. The colour of the LED ring
[
12 ]
changes with the water temperature.
must remain
2 ]
[
as short as possible.
6 ]
[
) .
9 ]
[
through the power
[
6 ]
on an even, stable surface.
to open the
3 ]
[
with water.
12 ]
[
onto the base
[
12 ]
9 ]
[
into the I position.
5 ]
[
Colour
Purple
Dark Blue
Light Blue
Green
Red
The product automatically turns off when the
*
water is boiled.
˜ Cleaning and care
m
WARNING! The product shall not be
immersed in water or other liquids. Do not
hold the product under running water.
Always disconnect the product from the power
*
supply before cleaning.
Check the product prior to each use for visible
*
signs of damage.
˜ Cleaning
Do not use any abrasive, aggressive cleaners
*
or hard brushes to clean the product.
Clean the product with a slightly damp cloth.
*
Use a mild detergent, if necessary.
Rub all parts dry with a clean cloth.
*
˜ Care
Cleaning the strainer
Rinse the strainer
*
Removing calcifications
Limescale reduces the efficiency of the product
and increases energy consumption. Check the
product regularly for limescale deposits.
Fill the water kettle
*
(5 to 15 %).
.
Push the I/O switch
*
Wait for the product to turn off automatically.
Let the solution remain in the water kettle
*
overnight. Discard the solution on the next
day.
Fill the water kettle
*
the MAX mark on the water gauge. Boil the
water.
Temperature (approx.)
≤ 50 °C
51–70 °C
71–80 °C
81–90 °C
> 91 °C
1 ]
[
with fresh water.
[
1 ]
with a vinegar solution
[
12 ]
into the I position.
[
5 ]
with clear water up to
[
12 ]
GB/IE/NI
12 ]
[
11
Advertenties
Hoofdstukken
Inhoudsopgave
