NL UK
4. HYDRAULIC SYSTEM
Installation of the Easymatic version
Do not
kink
the pipes
fig. 7
fig. 8
Release valve
fig. 9
The hydraulic pipes have to be bind up to the chassis and the
caravan floor.
Install the hydraulic pump in the middle of the cara-
van floor underside. Smear a small amount of glue on the
wooden multiplex plate (15x15 cms) and screw it against the
Release valve
caravan floor underside, on the previously selected location. Fix the
hydraulic pump against the wooden plate.
Lead the pipes and the electric cables through the holes of the
cover and fix them against the caravan floor underside, free of
moving suspension parts.
Electr.leads
Take care while bending the pipes. Be sure there are no kinks
in the pipes, this will damage the pipes (see fig. 7).
Be sure that the hole in the cover is corresponding with
the pressure release valve on the pump. In the event of a
malfunction, the pressure release valve can be operated
through this hole. The pressure will be released and the drive
rollers can be pushed back from the tires.
Be sure when closing the cover, that the pipes are free and
not squeezed.
19