Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PERSONAL SETTINGS
1. Press the
symbol and set the desired temperature by pressing the
temperature is set on 180°C) Press the
2.
When the preheating is completed you will hear a sound signal. Without operation within 5 minutes, the
appliance will go back into standby mode.
3.
Carefully pull the pan out of the appliance.
You will hear a sound signal.
NOTE: always completely remove the pan from the appliance before adding ingredients to the basket. Don't
push on the release button to do so.
4.
Place the food into the basket.
NOTE: Do not fill the basket more than 4/5, or the mentioned amount indicated in the above grid. Larger
quantities will give a lesser result.
CAKE FUNCTION: put the cake dough into the baking tin, the baking tin into the basket and place the
basket in the pan.
5.
Put the pan back into the appliance. Never use the pan without accessory with handle.
CAUTION: Don't touch the pan during or for some time after use, as it gets very hot. Only hold the pan by the
handle.
6. Set the baking time for the ingredients with the symbol . Standard it will start at 10 minutes. Press
or
to adjust the baking time. Add 3 minutes to the advised baking time if the appliance is cold.
NOTE: Press
to start the appliance after setting the time. Time and temperature can be adjusted while
operating. The system starts 5 seconds after confirmation of the settings.
7.
Some ingredients require shaking halfway through the baking process. To shake the food, take
the handle, pull the pan out of the appliance and shake. Then replace the pan into the
appliance. There is no need to interrupt the baking process by pressing
automatically when the pan is removed and starts again automatically when the pan is put back. The display
now shows a 5. The appliance will count down from 5. If the pan is placed in the appliance again within 5
minutes, the program will simply pick up where it left off. However, if the pan is not placed back into the
appliance within 5 minutes the appliance will go into standby mode.
NOTE: do not press the release button on the basket while shaking.
TIP: to minimize the weight, you can remove the basket out of the pan and only shake the basket. To do so,
remove pan with basket from the appliance, place on a heat resistant surface, and press the release button to
release the basket.
When you hear the sound signal 3 times, the set program is finished. The word End appears on the
8.
screen and the appliance goes into standby mode. Remove the pan from the appliance and put it on a
heat resistant surface.
symbol and then on the
35
or
symbol. (Standard
symbol to start preheating.
it stops
Advertenties
Inhoudsopgave
