Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Dishwasher detergents
Attention
Refill the rinse agent reservoir when the rinse aid indicator lights up.
• Do not overfill the rinse agent reservoir, as this will cause the rinse
agent to overflow.
• Rinse agent spillages must be cleaned up. Otherwise they may
lead to leakages as a result of extreme foaming.
1. Unscrew the cap from the rinse agent reservoir (to the left, toward
the arrow with "open").
2. Pour the rinse agent into the reservoir, taking care not to overfill it.
3. Replace the cap. Make sure that the cap is lined up with the "open"
arrow and turn in the direction of the "closed" arrow.
Setting the quantity of rinse agent
A fixed amount of rinse agent is added during the final rinse. As is the
case with detergent, the amount of rinse agent needed is dependent on
the hardness of the water in your area. Too much rinse agent can lead to
streaks on the dishes.
The rinse agent reservoir has 6 settings. To begin with, set the reservoir
to setting 2. If this still causes spotting on the dishes and the dishes do
not dry well, you can increase the amount of rinse agent added by
turning the selector knob on the reservoir to setting 3. If there is still no
improvement, turn the selector knob to a higher setting. Repeat this
action until the dishes are streak-free when they emerge from the
dishwasher.
The chemical agents in dishwasher detergents remove the dirt, break it
down and ensure that it is drained out of the dishwasher. The dishwasher
detergents you can buy in most shops are suitable for this purpose.
Warning!
Dishwasher detergent is a corrosive product. It should therefore
be kept out of the reach of children. If swallowed, consult a doctor
immediately and take the packaging with you.
EN 15
Advertenties
Hoofdstukken
Inhoudsopgave
