Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
24
English
DESCLING
BREW GROUP CLEAN
C
L
A
C
N
A
E
L
C
CADORNA Style_Plus EN-NL-PL.indd 24
Descaling
Descaling procedure
Descaling needs to be carried out when the machine signals it.
Use only the Gaggia descaling solution designed to guarantee the machine's
excellent performance. The use of other products could damage the machine and
leave residue in the water. Failure to descale the machine will void the warranty.
Remove the Classic Pannarello.
1
Press the CLEAN/SETTING
2
on the display.
Press the " DESCALING " button, then press the START/STOP
-
3
Remove the drip tray and the coffee pucks container, empty them, and insert
them in the machine again.
Remove the water tank and empty it. Remove the INTENZA+ filter, if present.
4
Empty the entire bottle of Gaggia descaling solution into the water tank and fill
5
the tank with water up to the CALC CLEAN notch. Reinsert it in the machine.
Place a large container (1.5l) under the steam tube and coffee dispenser.
6
Follow the instructions shown on the display to launch the descaling
7
procedure. This procedure lasts approximately 25 minutes and consists of
a descaling cycle and a rinse cycle, carried out with dispensing at regular
intervals.
Once the descaling cycle is complete, rinse the water tank, and water circuit,
8
following the instructions shown on the display.
Replace the INTENZA+ filter into the water tank.
9
Note: it is possible to pause and resume the procedure at any time by pressing the
START/STOP
button.
Warning: when the descaling procedure is active, the brew group cannot be
removed. Wait for the descaling process to end, then remove the brew group.
button and select the " CLEAN " button shown
button.
13/06/2019 09:58:15
Advertenties
Hoofdstukken
Inhoudsopgave
