Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Controls and Display
The control is carried out by push buttons
under the display on the outside of the cold
storage door. If the cold storage door is closed
and no push button is touched within 3 min-
utes, then the display light goes out.
• The inverter symbol always lights up as
long as the compressor is operating.
• Key lock
The device is equipped with an automat-
ic key lock. To change the settings, first
press the button
changes are made to the display for three
minutes, the key lock is reactivated.
1 Display for
2
3
4
5
6
7 Button for
selection
8
9
10
11
for three seconds. If no
9
Temperaturezone
Freezer
Temperaturezone
Fridge
Temperature
Smart-Mode
(Energy Saving)
Inverter
FastFreeze-Mode
Temperature
OK
Key lock
Function
Temperature zone
Regulate the Temperature in the Cooling Room
Tap the button 'TempZone'. If the display for
the cooling temperature blinks, then every
tap on 'Temp' changes the temperature by
one degree between 2 °C and 8 °C. If you
tap again at the setting of 8 °C, then 'OF'
illuminates and the cooling for this part of the
appliance is turned off.
VeggiBoxes
The VeggiBoxes serve as the optimal storage
for fruits and vegetables.
Regulate the Temperature in the Freezer
Tap on the button 'TempZone'. If the display
for the freezer temperature blinks, then every
tap on 'Temp' changes the temperature by
one degree between –24 °C and –16 °C.
Special Features
Tap if necessary several times on 'Function'
and subsequently on 'OK', in order to activate
the following special features. To deactivate a
special feature, tap the 'Function' button until
the symbol of the desired function gets illu-
minated. Then, hit 'OK'. The symbol lighting
goes out.
Fast Freezing
This setting fixes the freezer temperature for 26
hours at –32 °C. This temperature cannot be
changed until the function is deactivated. After
26 hours, the appliance will freeze again at
the preset temperature.
SMART
This setting fixes the cooling temperature at 4
°C and the freezer temperature -18 °C. These
temperatures cannot be changed until the
function is deactivated.
After 5 seconds without further input, the
blinking stops, and the respective function
will be taken over.
Special Functional Features
Memory Preservation in the Case of Power
Failure
Every configuration will be preserved in the
case of a separation from the mains supply
and will come into operation again when the
mains supply is re-established.
Delayed Restart after Mains Failure
So as to protect the appliance from damages,
it cannot be turned on again immediately for
a period of 5 minutes after a short separation
from the mains supply. Wait a few minutes
until the appliance starts working again.
- 21 -
Advertenties
Inhoudsopgave
