Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Mounting accessories: door compartments and shelves
To store food of different sizes, the door compartments can be set to different
heights. Proceed as follows: gradually pull the compartment in the direction of
the arrows until it comes loose and put it in the desired position.
The walls of the refrigerator are equipped with a series of guide profiles so that
the shelves can be inserted if desired. To remove the shelf, lift it first and then pull
it out. To put the shelf back in place, push it into place before lowering.
For the two-piece shelf, first push back the first part and then pull out the second
part.
Raise the rear edge of the shelf to prevent food coming into contact with the wall
lining. Hold the shelf firmly when removing or replacing it and take care to avoid
damage.
8. Storing food
See Section 4 "Use".
3.2 DOOR REVERSAL INSTRUCTIONS
Open the door and loosen the locking nut with an adjustable wrench. To raise the door, turn the adjusting nut
clockwise. To lower the refrigerator door, turn the adjusting nut anticlockwise. When both doors are aligned straight,
tighten the locking nut (anticlockwise).
Necessary tool:
•
Adjustable spanner
Uneven height
34
Fixed shaft
Adjusting nut
Lock nut
Adjusting foot
Advertenties
Hoofdstukken
Inhoudsopgave
