Becker CentronicPLUS SWC548 PLUS Montage- En Gebruiksaanwijzing pagina 30

Meerkanaals handzender voor zon-windbesturing bidirectioneel

Inhoudsopgave

Advertenties

Beschikbare talen

30 - en

Briefly press the programming button to change

to the setting mode.

▻ The receiver confirms.

▻ The LED ring of the transmitter slowly

pulses light blue.

▻ The receiver now enters dead-man

mode.

► The setting mode is now active.

If a receiver has not yet been added to the

installation (LED ring lights up yellow), it will

not be possible to select it in this way. The re-

ceiver must be added to the installation be-

forehand.

Press and hold the function button for at least 3

seconds.

▻ The hand-held transmitter switches to

threshold mode.

▻ The LED ring of the transmitter shows

the currently set sun threshold by light-

ing up yellow and orange.

Press the

button to adjust the threshold to

one of 15 stages (approx. 2 KLux to 100 KLux).

Press the STOP button to restore the default

threshold (approx. 25 KLux).

Inhoudsopgave

Advertenties

Hoofdstukken

Inhoudsopgave