Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Setting the thresholds
Setting the thresholds
3s
Bring the transmitter as close as possible to the
required receiver.
Press the programming button for 3 seconds. The
transmitter performs a search and the LED ring
continuously changes colour. The transmitter then
switches to receiver selection and selects the re-
ceiver with the best connection quality.
▻ The receiver confirms.
If you do not receive confirmation from the re-
quired receiver, you can press the
toggle between the available receivers until the re-
quired receiver confirms.
▻ The transmitter displays the current as-
signment status of the receiver via the
LED ring.
Assignment status
Lights up yel-
low:
Lights up
blue:
Lights up
green:
The receiver is not yet part of the
installation or is in the as-de-
livered condition.
The receiver is not assigned to
the selected channel.
The receiver is assigned to the
selected channel.
/
button to
29 - en
Advertenties
Hoofdstukken
Inhoudsopgave
Gerelateerde Handleidingen voor Becker CentronicPLUS SWC548 PLUS
Gerelateerde Producten voor Becker CentronicPLUS SWC548 PLUS
- Becker Centronic SunWindControl SWC545
- Becker Centronic SunWindControl SWC241-II
- Becker Centronic SunWindControl SWC442-II
- Becker CentronicPLUS SWC541 PLUS
- Becker Centronic SunWindControl SWC245-II
- Becker Centronic SunWindControl SWC441-II
- Becker Centronic SunWindControl SWC445-II
- Becker CentronicPLUS EC548 PLUS