Inhoudsopgave
Advertenties
Machine Set-up Guide
Filling the Clean Water Tank
The TTB 1840 is equipped with a large 18 litre clean-water tank allowing large areas to be cleaned in a single fill.
1
To fill the clean-water tank, remove the filler cap (Fig.1). Fill using a hose, bucket or a suitable container (Fig.2).
Use the fill indicator (Fig.3).
Note: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the clean water tank
during the filling process. If using a bucket or similar, ensure it is always clean and free from debris.
Fill Level Indicator
The TTB 1840 is equipped with a large 18 litre clean-water tank allowing large areas to be cleaned in a single fill.
A
Showing the clean-water tank empty
Water Flow Adjustment
1
Located on the left of the machine is the On / Off water tap (Fig.1).
Ideally set the tap to 45
this enables the cleaning solution to last the same time as a fully-charged battery (Fig.2).
0
2
(Fig.A)
Fill Indicator
3
B
Showing the clean-water tank full
(Fig.B)
2
11
T 01460 68600
Advertenties
Inhoudsopgave
