Advertenties
Beschikbare talen
Beschikbare talen
f) Switching the output on/off
The device has a function to switch the output on/off manually.
To switch the output on/off, press the 'Output ON/OFF' button (2).
•
If the LED next to the 'Output ON/OFF' button (2) lights up, the output is switched on.
•
If the LED next to the 'Output ON/OFF' button (2) goes out, the output is switched off.
Adjusting the default setting
1
The output is switched off by default when the device is started. Alternatively, you can set the
device to adopt the last status of the output when it is switched on. Proceed as follows:
1. Press and hold the menu button (5) to enter menu mode.
2. Turn the voltage knob (7) until
3. Press the voltage knob (7) to adjust the setting.
4. Turn the current knob (8) until
the last status of the output is adopted when the device is switched on.
5. Press the voltage knob (7) to confirm the setting.
6. Press the menu button (5) to exit menu mode.
g) Saving and retrieving presets
The device has three buttons which can be used to save and retrieve current and voltage
presets.
Saving presets
1
To save presets, proceed as follows:
1. Remove any connected consumers from the output.
2. Press one of the preset buttons (3).
3. Set the voltage or current with the knobs (7,8).
4. The set values are automatically saved as the preset for the selected button.
Retrieving presets
2
Always check the set values before connecting a consumer, this avoids the risk of
damage.
To retrieve a preset, simply press the respective preset button (3). The LED next to the pressed
button lights up and the preset values are adopted.
42
appears on the display.
appears on the display.
appears on the display. With this setting,
Advertenties
