Advertenties
Beschikbare talen
Beschikbare talen
• Select a stable, flat, clean, sufficiently large place for the product.
• Ensure that the cables are not pinched or damaged by sharp edges. Route the
connection cable so that nobody can trip over it.
• The mains socket must be located near to the device and be easily accessible.
• Do not place any containers filled with liquid on or next to the product. If these
liquids come into contact with the device, it may be permanently damaged, plus
there is a risk of fire or electric shock.
• The product warms up during use. Ensure that there is sufficient ventilation. Do not
cover the ventilation openings on the device!
• Do not place the product directly next to devices with strong electrical or magnetic
fields (e.g. transformers, motors, cordless telephones, wireless devices, etc.) as
these can prevent the product from working properly.
d) Operation
• Never use the product immediately after taking it from a cold room to a warm one.
This may generate condensation, which can cause the product to malfunction or
damage the interior components. It may also cause a fatal electric shock! Let the
product reach room temperature before using it. This may take several hours.
• Do not wear metallic or conductive jewellery chains, bracelets, rings, etc. when
working with power supplies or chargers. Never connect power supplies and
chargers to people or animals.
• If liquid comes into contact with the product or its interior components:
- Switch the power supply off at the mains socket to which it is connected. To do
this, switch the corresponding circuit breakers off or unscrew the fuse. In addition,
switch the residual current circuit breaker off in order to disconnect all poles of the
socket from the mains voltage.
- Disconnect the mains plug from the mains socket.
- Discontinue use of the product and take it to a specialised workshop or dispose of
it in an environmentally friendly manner.
e) Electrical safety
• Before connecting the product to the mains, ensure that your local mains voltage
matches the specifications on the product nameplate.
• If the mains cable is damaged:
- Switch the power supply off at the mains socket to which it is connected. To do
this, switch the corresponding circuit breakers off or unscrew the fuse. In addition,
switch the residual current circuit breaker off in order to disconnect all poles of the
socket from the mains voltage.
33
Advertenties
