Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Operating the induction hob
Use of the touch keys and selection bar
Place the tip of your finger flat on a key or the selection bar to achieve the best results. You do
not have to apply any pressure. The touch keys only react to the light pressure of a fingertip.
Do not operate the controls with any other objects. Each key or the selection bar activation is
followed by a sound signal. Slide over the selection bar to change a setting.
1. Put a pan on a cooking zone.
2. Touch and hold the On/Off key until you hear an audio signal.
The hob is in standby mode.
▷
Zero (0) lights up in the active cooking zone display.
▷
If no further entry is made, the induction hob will turn itself Off after a few seconds for
▷
safety reasons.
3. Touch the selection bar to select a cooking level.
▷
A short acoustic signal will sound.
<--------------------------->
If the hob is not used for 10 seconds, it will stop automatically.
Adjust the cooking cooking levels
1. Touch a selection bar.
The cooking level appears in the display.
▷
2. Slide over the selection bar to change the cooking level.
Stop a cooking zone
A cooking zone is in use.
1. Touch the selection bar and slide to the left to set the cooking lever to zero (0).
▷
The cooking zone stops.
The hob stops after 10 seconds when all cooking zones are set to Zero (0) and no other
▷
functions are in use.
EN 15
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
