Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10
Operation
SPL2(TS) and SPL3(TS) user manual
EN
USB-connector. The installation engineer or authority that calibrates the limiter is able to
program the limiter, with the aid of a special computer program. Each day of the week is divided
into 3 TimeSlots. The attenuation of each timeslot and the timeslot boundaries can be
programmed with this program. Also special bypass-periods can be set: periods during which the
limiter-functions are not active, for example during special events. 20 Different bypass periods
can be programmed. The computer program is able to make a hardcopy of the data programmed
in your limiter. It is useful to keep a hardcopy with the limiter, so the programmed data can always
be checked. If your installation engineer or the calibrating authority doesn't have this program at
his disposal, please contact your DATEQ-representative. With some restrictions, software is
available freely.
In the carton you will find a USB stick with the new interface software. Connect the limiter to the
computer, start the software and the following screen will be loaded.
Click on "connect"
The clock in the timer can be synchronized with the clock of your computer. If a DSR (license file)
is present on your system you can make adjustments to the time slots of your limiter.
Advertenties
Inhoudsopgave
