Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8
Installation
REDUCTION
OVERLOAD
WARNING
LIVE MODE OK
SANCTION ACTIVE
MAINS
Connection for LED's or solid-state-relays, for external signalling of the
REDUCTION situation (20 V DC / 10 mA).
Connection for LED's or solid-state-relays, for external signalling of the
OVERLOAD situation (20 V / 10 mA).
Connection for LED's or solid-state-relays, for external signalling of the
WARNING situation (20 V / 10 mA).
Output for driving the switched power for the "live"-amplifiers (normally this
output is "on" (+20 V / 10 mA DC), in the case of sanction, current is
switched off.
In SPL2 mode it is possible to apply an additional sanction when the
threshold is exceeded by more than 14dB. If this function is required pins
6 and 7 must be shorted.
Mains connection cable. The SPL limiters operate at 220 .. 240 V AC. The
limiter has a built-in self recovering fuse which does not need to be
replaced.
SPL2(TS) and SPL3(TS) user manual
EN
Advertenties
Inhoudsopgave
