Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
IN S TA LLA TION M A N U A L
9.4 Glass pane
•
Avoid damage when removing/fitting the glass pane.
!Caution
•
Avoid/remove fingerprints on the glass pane(s) as they will burn into the glass.
Use the supplied glass pane cleaner to remove fingerprints from the glass pane(s).
!Tip
9.4.1 Disassembly of glass pane
9.4.1.1 Disassembly of glass pane in door
To remove the glass pane in the door, please follow the instructions below (see Appendix 2, fig. 9):
Ø
Open the door.
Ø
Lift out the door by sliding it upwards.
Ø
Place the door on a flat surface.
Ø
Remove the cord from the frame.
Ø
Unscrew the nuts from the glass sections.
Ø
Remove the glass sections.
Ø
Lift out the glass pane. The pane seal is also taken out.
9.4.2 Assembly of glass pane
9.4.2.1 Assembly of glass pane in door
Assemble the glass pane in the door according to the steps described in section 9.4.1.1 'Disassembly of glass pane
in door', only in reverse order.
•
Do not fasten the bolts too tight to avoid breaking off and/or stripping: overtightening will cause breakage.
!Caution
•
Place the glass pane (including new pane seal) with the logo to the bottom right.
•
Place a new door seal.
•
Insert both ends of the cord in a special sleeve. (see appendix 2, fig. 9).
Make sure the sleeve is placed at the bottom side of the glass pane.
!Caution
39
Advertenties
Hoofdstukken
Inhoudsopgave
