Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SWITCHING ON/OFF
The device is switched on with button 1. Most screens are switched on by the Iris . If this is not the
case, switch on the screen as well (see screen manual).
The Iris is switched off with button 1. Some screens switch off the Iris when they are switched off.
After switching on, an on-screen bar shows the start-up progress. The Iris indicates when it is
ready to be used by telling "the device is ready for use".
SLIDING TABLE
HEIGHT AND TILT ADJUSTMENT
Height (Flex arm and large screens)
According to personal preference, the screen of the Vocatex can
be moved up or down. To do this, make sure you take hold of
the screen on both the left and right side of the screen.
Increase Lift Strength (Flex arm)
If the screen doesn't stay up when raised, increase the lift
strength by turning the angle key right.
Decrease Lift Strength (Flex arm)
If the screen doesn't stay down when lowered, decrease the
lift strength by turning the angle key left.
Tilt (Flex arm)
According to personal preference, the screen of the Iris can be
tilt. To do this, make sure you take hold of the screen on both
the left and right side of the screen.
Increase Friction
If the screen tilts down, then you'll need to increase friction by
turning the angle key right.
KOBA Vision Iris - Iris Plus
Under the table you can find a lever which controls the brake. If you
move the lever to the left, the slide table is free to move
left/right/up/down. If you move the lever to the right you adjust the
friction. If you move the lever all the way to the right, the slide table
will be blocked.
16
Advertenties
Inhoudsopgave
