Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
User programs
You are able to make and safe three user programs (U01-U03). Each user program is
divided into 10 segments for which you can set the speed and incline level.
Make or change a user program:
1. Select the desired user program (U01-U03) with the PROGRAM key. The user
programs are just after the preset programs (P01-P08) in the main menu.
2. Press the MODE key to set the speed and incline level of the first segment. Press
the SPEED
keys to set the desired speed and press the INCLINE
to set the desired incline level.
3. Press the MODE key to go to the next segment and use the INCLINE
keys again to set the preferred speed and incline.
4. Repeat the previous step until all the 10 segments are set.
5. Now press the MODE key to set the training duration with the INCLINE
keys.
SPEED
6. Press the START key to start your trainings session. You user program will be
saved automatically.
Start a saved user program:
1. Select the desired user program (U01-U03) with the PROGRAM key. The user
programs are just after the preset programs (P01-P08) in the main menu.
2. Now wait a few seconds until the time value on the computer start flashing at the
default 30 minutes. Now set your preferred training time with the INCLINE
SPEED
keys.
3. Press the START key to start your trainings session.
The duration of one segment (with according speed and incline level) will be
determined by the set training duration. Before changing to the next segment the
computer will give a sound as warning for a possible change in speed and / or
incline level. During the training session you are able to modify the speed and / or
incline for the current segment with the INCLINE
training is finished when the set duration has been elapsed. The computer will give
three sound signals before gradually slowing the running belt.
keys
, SPEED
or SPEED
keys. The
Manual Runner DTM400i Treadmill - 57
4. Use
or
,
Advertenties
Hoofdstukken
Inhoudsopgave
