Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Press the manually adjustable coffee button (
once more to stop the water flow. Then switch off the appliance, remove the plug from the socket and remove the remaining water
from the water reservoir and the cup.
• Allow the appliance to cool down and clean all separate parts as indicated in section CLEANING AND MAINTENANCE.
Attention: The appliance can make more noise when pumping water for the first time, this is normal, as the air in the appliance is
released. After approximately 20 minutes the noise will decrease.
Important: Only fill the appliance with cold water. Hot water has a negative effect on the coffee machine's life span.
5
making espresso/coffee
Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on a flat,
stable and heat-resistant surface. Insert the plug in an earthed wall socket.
1. Take the removable water reservoir from the appliance, slide the cover upwards and fold it over.
Fill the water reservoir with cold drinking water. Do not fill it above the MAX mark. Place the cover back on the
reservoir and slide the reservoir back into the appliance.
2. Take the filter holder from the appliance by turning it clockwise.
3. Fill the one- or two-cup filter with the required amount of coffee by means of the provided measuring spoon.
Firmly compress the coffee using the tamper. Depending on your taste, approximately 1 cup of coffee can be
made with 1 measuring spoon. When using coffee capsules for making coffee, you can place the capsules of
your taste in the filter provided for that purpose. Attention! Avoid making contact with the blades in the filter for coffee capsules,
these are very sharp.
4. Place the filter in the filter holder, making sure that the ball at the side of the filter falls precisely into the indentation in the
holder. Then place the holder in the appliance from the INSERT position and firmly turn the handle counter-clockwise to
the LOCK position.
5. Place the required number of coffee cups on the cup grille. Make sure the cups are properly positioned, so that the coffee flows
into the cups.
6. Check that the steam controller is switched off (turned upwards). Switch on the appliance by pressing the on/off button (
The indicator lights on the operating panel start to flash to indicate that the appliance is being pre-heated. When the lights remain
on, the pre-heating process has been completed.
Attention: During pre-heating, the appliance does not work when pressing the flashing buttons.
7. Press the required coffee button:
-
for 1 cup of coffee, the coffee making process stops automatically;
-
for 2 cups of coffee, the coffee making process stops automatically;
-
to determine yourself how much coffee you want to make, press the button once more when the required amount of
coffee has been made. If you do not do this, the process stops automatically after 90 seconds. You will run the risk that your
cup will overflow!
Attention: After making coffee, the indicator lights may start to flash again to indicate that the appliance is pre-heating.
When the lights remains on, you can continue making coffee.
8. Coffee tastes best immediately after it has been made, so do not wait too long before serving.
Tips:
• We recommend slightly warming up an espresso cup prior to use, for instance by first placing it on the hot plate on top of the
appliance. A pre-heated cup will prevent the espresso from cooling down too quickly.
• In order to make a good espresso, we recommend pre-heating the appliance. This is done by first making a cup of espresso
without adding coffee, as a result of which hot water flows through the appliance.
Warning: Do not leave your coffee machine unsupervised when it is working, because of the manual actions you have to perform.
) and allow the appliance to pump water for approx. 30 seconds. Press the button
).
17
English
•
Advertenties
Inhoudsopgave
