Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Becker Handleidingen
  4. Ontvangers
  5. VarioControl VC320
  6. Gebruikers- en montagehandleiding

Deleting All Transmitters (Except The Master Transmitter); Overwriting The Master - Becker VarioControl VC320 Gebruikers- En Montagehandleiding

Verberg thumbnails
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Deleting all transmitters (except the master
transmitter)
Press the programming button on the master transmitter for 3 seconds.
▻ The receiver confirms.
Re-press the programming button on the master transmitter for 3 seconds.
▻ The receiver confirms.
Re-press the programming button on the master transmitter for 10 seconds.
▻ The receiver confirms.
► All transmitters (except the master transmitter) are now deleted from the
radio receiver.

Overwriting the master

Switch off the power supply to the radio receiver for 10 seconds, then switch it
back on.
▻ The radio receiver remains ready for programming for 3 minutes.
To ensure that the new master transmitter is programmed in
the desired radio receiver only, all other receivers which are
connected to the same power supply must be deactivated
from the programming mode. To do so, after switching back
on the power, execute a drive or stop command using the
transmitter for the given receivers.
Now press the programming button of the new master transmitter for 10
seconds.
▻ The receiver confirms.
► The new master transmitter is now programmed and the old master
transmitter deleted.
30 - en

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Becker VarioControl VC320

Gerelateerde Producten voor Becker VarioControl VC320

Inhoudsopgave