Deleting The Intermediate Position; Ventilation Position; Setting The Ventilation Position; 3B) Checking The Ventilation Position - Becker VarioControl VC320 Gebruikers- En Montagehandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Deleting the intermediate position

Open/close the shading solution to the intermediate position.

Press the STOP button and, within 3 seconds, also press the DOWN button

and hold the two buttons down.

▻ The receiver confirms.

► The intermediate position is now deleted.

This function allows you to open the roller shutter from the

lower limit position up until the ventilation slots are opened.

Both limit positions must be set before the ventilation posi-

tion is set.

The curtain runs to the ventilation position from the lower

limit position.

Travel the shading solution from the lower limit position to the desired ventila-

tion position.

Press the STOP button and, within 3 seconds, also press the UP button and

hold the two buttons down.

▻ The receiver confirms.

► The ventilation position is now saved.

Press the UP button twice within one second.

► The shading solution runs to the ventilation position.

28 - en

Inhoudsopgave

Advertenties

Inhoudsopgave