Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Connect the cable to the connector on the system board and adhere the adhesive tape [1].
5. Reroute the eDP cable and connect it to the eDP connector [2].
6. Place the eDP cable bracket on the system board [3].
7. Replace the two (M2x4) screws that secures the eDP cable bracket to the system board [4].
Onderdelen verwijderen en plaatsen
79
Advertenties
Inhoudsopgave
Probleemoplossen
