Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Remove the
Coin cell
battery.
10. Remove the
Inner
frame.
Steps
1. Disconnect the system fan cable from the connector on the system board.
2. Remove the four (M2x3) screws that secure the heatsink assembly to the system board [1].
Installing the heatsink assembly
Steps
1. Place the heatsink assembly on the system board and align the screw holes on the heatsink with the screw holes on the system board
[1].
2. In sequential order (as indicated on the heatsink), tighten the four (M2x3) screws that secure the heatsink assembly to the system
board [2].
56
Onderdelen verwijderen en plaatsen
Advertenties
Inhoudsopgave
Probleemoplossen
