Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Remove the
Coin cell
battery.
10. Remove the
Inner
frame.
Steps
1. Disconnect and peel the USH daughter board Flexible Flat Cable (FFC) from the USH daughter board [1, 2].
2. Disconnect the LED board cable from the connector on the system board.
3. Unroute the LED board cable [2].
4. Peel the grey adhesive tape that secures the LED board [2].
5. Remove the single (M2x2.5) screw that secures LED board to the palmrest [1].
6. Lift the LED board away from the computer [2].
Onderdelen verwijderen en plaatsen
47
Advertenties
Inhoudsopgave
Probleemoplossen
