Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Use
Centering and tensioning the belt
Within the first weeks of using the treadmill, it is possible that you need to centre the belt. For example this can
happen when applying more pressure to the left foot over the right.
Make sure the treadmill is running with a speed between 3 and 5 KPH. At the back of the frame there are two
adjustment bolts. These bolts allow you to adjust the rear roller. When the treadmill is running to the left, you need
to turn the left adjusting bolt clockwise and the right adjusting bolt counter clockwise. Went the treadmill is pulling
to the right, you have to turn the left adjusting bolt counter-clockwise and the right adjusting screw clockwise. Make
sure the belt stays well tensioned and is not waving.
Centre the walking belt by app
Press the three dots in the top right corner in the main menu of the walkingpad app. Select settings, then
calibration. Now follow the instructions of the walkingpad app.
Manual Walker DTM100i WalkingPad - 45
Advertenties
Hoofdstukken
Inhoudsopgave
