Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Use
3.5 Modes
Standby
In standby mode the motor, sensors and most buttons are
inactive. Press the mode button on the DTM100i or the
remote to wake the DTM100i walkingpad from standby
mode.
Manual Mode
In manual mode the DTM100i can be controlled with the
included remote control or with the Walkingpad app on your
smartphone.
Automatic mode
In the automatic mode you are able to control your DTM100i
walkingpad with your position on the walking surface. With
this mode no app or remote control is required.
Warning light
An error may have occurred. Next to the warning light there
may be an error code on the display. Contact your local
reseller.
38 - Manual Walker DTM100i WalkingPad
To switch between manual or automatic mode short press the Mode /
Switch button on the side of the DTM100i or on the remote. Long press
the Mode / Switch to activate standby mode.
Mode / Switch
You can also switch between modes in the Walkingpad app.
Please note: Due to safety reasons the DTM100i is limited to 3 KPH /
1.75 MPH for the first 2 kilometers / 1.25 miles. After completing your
first 2 kilometres the max. speed of 6 KPH / 3.75 can be reached.
Mode / Switch
Advertenties
Hoofdstukken
Inhoudsopgave
