Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Vervangen vetfilters
Replace grease filters for optimum operation of the ex-
tractor hood, the following is recommended Novy to re-
place the grease filter after 5 years. Grease filter type
number for the Fusion Pro / Advanced is 8740.050. In
the model of 60 cm, 90 cm and 120 cm are respectively
2, 3 and 4 grease filters.
UK : contact the Novy service department (Tel.:
+44 (0) 207 866 2493) or your local installer
to order the grease filter.
4.2
Recirculation (option)
If you have chosen for recirculation, please follow the in-
structions below.
The red LED will light up after 400 working hours (time to
regenerate the Monoblock recirculation filter). The recir-
culation filter is to be found behind the grease filter.
Remove the Monoblock recirculation filter
•
Open the bottom plate with both hands and remove
the aluminium grease filter from the hood.
•
The Monoblock recirculation filter is found in its ope-
ning in the cooker hood. Remove it from the cooker
hood.
Regenerate the Monoblock recirculation filter
•
The Monoblock can be regenerated up to 12 times.
This is done in the oven.
•
Place the filter in the oven for 1 hour at 120°C. Provi-
de sufficient fresh air in the room where the oven has
been placed, as smells can be released. Smells can
be released when baking certain kinds of fish. In this
case it is best to im-mediately regenerate the filter in
the oven.
Reset the Monoblock recirculation filter
(motor) must be running)
Simultaneously press
2
indicator lamp flashes 3 times for confirmation. If the pro-
gramming is not carried out, the programming is auto-
matically set after the chimney hood has been switched
on 10 timesin- en uitschakelen van de motor automatisch
resetten.
(The cooker hood
and
for 3 sec. until the red
3
Place the Monoblock recirculation filter
•
Open the bottom plate with both hands and remove
the aluminium grease filter from the hood.
•
Place the Monoblock recirculation filter is its opening
in the cooker hood.
•
Put back the aluminium grease filter and close the
bottom plate.
Vervangen monoblock filter
Replace monoblock filter for optimum operation of the
extractor hood, the following is recommended Novy to
replace the monoblock filter after 6 years. Monoblock
filter type number for the Fusion Pro / Advanced
is 8740,400.
UK : contact the Novy service department
(Tel.: +44 (0) 207 866 2493) or your local in-
staller to order the monobloc filter.
4.3
Maintenance of the hood
Please allow the lights to cool down sufficiently before
cleaning the hood. Use a soft, wet cloth and a mild de-
tergent to clean the hood. Never use aggressive, abrasi-
ve detergents or sponges. Bleach will damage stainless
steel. The stainless steel surfaces can be treated with
Novy Inoxcleaner (906.060) after cleaning.
4.4
Technical problem
In case of technical problems please contact Novy
Service Department:
Belgium Tel.: 056/36.51.02
France Tel.: 03.20.94.06.62
Germany Tel.: 0511.54.20.771
For all other countries: your local installor or Novy Belgi-
um: +32 (0)56/36.51.02
Please supply us with the model number of your hood.
The model number can be found on the engraved
plaque behind the filter.
You can make a note of the number here:
.................................
EN 31
Advertenties
Hoofdstukken
Inhoudsopgave
