2.3
Precautions not to damage the appliance
•
The mounting instructions describe the correct way
of mounting. Carefully read these instructions.
•
Check the distance between the cooking surface
and the hood. The minimum and maximum heights
are indicated in the mounting instructions.
•
•
Never use the hood without the fat filters in order to
prevent dirt and fat from further entering the hood,
which will eventually affect the performance and
functioning of the hood.
•
Always stay around when you are frying, roas-
ting, grilling of deep-frying. Overheated oil and fat
may-catch fire and damage the hood.
2.4
Air supply
When using a hood sufficient air flow is necessary.
However large your kitchen may be, there is only so
much air available in that space. Opening a door or
window or the installation of a ventilation grid clo-
se to the hood insures a good quality of air flow.
EN 28
3. OPERATION
The controls are on the rotating valve.
Open the glass cover by turning it towards you.
switch on / off
1
decrease speed level
2
increase speed level
3
illumination
4
5
indication speed levels stand
6
3.1
Extraction
Switch on – switch off
To switch the motor on push button
ways resume the level it was previously switched off in.
Switch off with 10 minute delay
Press button
once. The first green LED blinks, the
1
other LED's remain lit up according to the level in use.
After 10 minutes motor and illumination switch off auto-
matically.
. The hood will al-
1