Advertenties
Beschikbare talen
Beschikbare talen
d) Setting the Temperatures
Two temperatures can be set to later perform the temperature monitoring of the room
temperature controller and a relay switching process:
Button "
"
Comfort temperature (regular temperature value)
Button " "
Savings temperature (temperature value for night reduction)
When the temperatures are to be set, the thermostat must not be in the programme
"0" (display "PROG 0" at the lower right). You need to leave this programme before
setting the above temperature values. In this respect, see chapter 11. f).
The programme "0" is the frost protection mode, the temperature is set fixed to +7 °C
in this operating mode (cannot be changed).
• Briefly press the button "TEMP"; the temperature display flashes in the display.
• To set the comfort temperature, push the button "
the desired temperature.
Keeping the button down for some time will adjust quickly.
• To set the savings temperature (night reduction), push the button " " (4) repeatedly until the
display shows the desired temperature.
Keeping the button down for some time will adjust quickly.
• To terminate this setting mode, briefly press "OK". The temperature display stops flashing;
the temperatures are saved.
The setting mode is left automatically if no button is pushed for approx. 10 seconds.
40
" (3) repeatedly until the display shows
Advertenties
