Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Automat‐
ic light
Mode H3
On
Mode H4
On
Mode H5
On
Mode H6
On
1)
The hob detects the boiling process and activates
fan speed in accordance with automatic mode.
2)
The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3)
This mode activates the fan and the light and does
not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Press
for 3 seconds. The display
comes on and goes off.
3. Press
for 3 seconds until
comes on.
4. Press
a few times until
5. Press
of the Timer to select an
automatic mode.
To operate the hood directly on the hood
panel deactivate the automatic mode of
the function.
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that time
the system deactivates the fan
automatically and prevents you from
accidental activation of the fan for the
next 30 seconds.
Operating the fan speed manually
You can also operate the function manually.
To do that touch
when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan
speed manually. When you press
48
ENGLISH
Boiling 1)
Frying 2)
Off
Fan speed
1
Fan speed
Fan speed
1
1
Fan speed
Fan speed
1
2
Fan speed
Fan speed
2
3
or
comes on.
you
raise the fan speed by one. When you reach
an intensive level and press
set fan speed to 0 which deactivates the hood
fan. To start the fan again with fan speed 1
touch
.
To activate automatic operation of the
function, deactivate the hob and activate
it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2
minutes after deactivating the hob.
6.14 Power management function
• Cooking zones are grouped according to
the location and number of phases in the
hob. See the illustration.
• Each phase has a maximum electricity
load.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity load of the cooking zones
connected to a single phase is exceeded.
• The function reduces the power of the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones changes between two levels.
again you will
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
