Advertenties
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Calibration
The measuring device should be calibrated and tested on a regular
basis to ensure it is accurate and working properly. We recommend
the measuring device is calibrated every 1 - 2 years. If necessary, contact
your distributor or the UMAREX-LASERLINER service department.
Technical Data
Precision (typical)*
Measurement range
(inside) **
Laser class
Laser wavelength
Automatic switch-off
Power supply
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
* measuring distance up to 10 m with strongly reflective target surface
and at room temperature. The measurement deviation may increase by
+/-0.2 mm/m for weakly reflective target surfaces.
** at max. 5000 lux
EU and UK directives and disposal
The product complies with all necessary standards for the free movement
of goods within the EU and the UK.
This product, including accessories and packaging, is an electrical appliance
that must be recycled in an environmentally appropriate manner in accor-
dance with European and UK directives on waste electrical and electronic
equipment, batteries and packaging, in order to recover valuable raw
materials. Remove the batteries from the device without damaging it
using standard tools and a separate collection arranged before returning
the device for disposal.
Further safety and supplementary notices at:
https://packd.li/ll/ARI/in
(Subject to technical changes without notice. 24W28)
± 2 mm
0.05 m - 40 m
2 / < 1 mW (IEC 60825-1:2014,
EN 60825-1:2014/A11:2021)
650 nm
30 s laser / 3 min device
2 x 1.5V LR03 (AAA)
0°C ... 40°C, max. humidity, 20 ... 85% rH,
no condensation, max. working altitude
2000 m above sea level
-20°C ... 70°C, max. humidity 80% rH
37 x 118 x 26 mm (not including adapter)
84 g (incl. batteries)
DistanceCheck 40
13
EN
Advertenties
