Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 2: Preparing the washing process
1. Sort the laundry by type of fabric, colour, soiling, and allowed washing temperature (see
PROGRAMME TABLE).
2. Wash the laundry that sheds a lot of fibre or lint separately from other laundry.
3. Empty the pockets. Coins, nails etc. could damage the machine and the fabric.
4. Close the buttons and zippers, tie any ribbons, and turn the pockets inside out; remove any metal
clips that could damage the laundry and washing machine interior, or clog the drain.
5. Place very sensitive clothes and small items in a special-purpose laundry washing bag.
(The special-purpose laundry bag is available as an optional accessory.)
Switching on the washing machine
Use the power cord to connect the washing machine to power mains, and connect the washing
machine to water supply.
To turn on the appliance, rotate the program selector knob (1) to any position.
With some models, the washing machine drum is also lit for 5 minutes when the washing machine is
switched on (figure 2).
The light in the washing machine drum can also remain lit during appliance operation, if you press
the START/PAUSE (9) button, as well as after the washing programme is completed.
(The lamp in the washing machine drum is not suitable for any other use.)
1
2
29
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
